Maintenance Summary - 4.000 Operating hours
It is recommended to document the maintenance activities carried out by using the appropriate
maintenance log. The maintenance log has the document number DIE249EN - 15.08.2022.
D010 - Cleaning of the machine
D015 - Clean the cover at the work area door
D020 - Check the pressure accumulator
D053 - Check the lubrication system
D057 - Check the pneumatic system
D077 - Check tool clamping sets of the milling spindles
D087 - Check main and counter spindles
D105 - Wassermann tool change system
D110 - Check hydraulic system
D170 - Check the system for reconditioning the cooling lubricant
D180 - Check fire extinguishing system (visual inspection)
D220 - Replace belts and check belt tension
D458 - Replacing hydraulic fluid
D500 - Perform data backup
D520 - Check control cabinet and cable assemblies (visual inspection)
D570 - Maintenance of turret steady rest SR2 or SLU X1 (by SMW)
Maintenance Summary - 4.000 Operating hours
92
Maintenance Instructions
G200.3 G220.3
DIE248EN - 15.08.2022
To Next Page
Loading...
