A049 - Check the lubrication system (visual inspection)
Orientation
Various components must be checked regularly on the lubrication system.
Due to different requirements and/or specifications of the respective
manufacturers, be sure to review the respective manufacturer's
documentation!
Example: Lubrication system G420
The following components must be checked on the lubrication system:
a) Filler neck
b) Pressure gauge for system pressure (>20 bar)
Procedure
1. Check oil level.
2. Check pressure setting on pressure gauge (>20 bar)
Maintenance Summary - Care activities
18
Maintenance Instructions
G200.3 G220.3
DIE248EN - 15.08.2022
To Next Page
