Slat/shingle cover (STRAPANO - Arnold) G420
1
Slider
2 Holder (two-piece)
3 Slat/shingle cover (carrier material)
This additional cover consists of three components. During visual inspection, check
only the condition of the substrate, the slider and the holder.
Procedure
1. Check the overall condition of the substrate. Assess wear. If individual parts
such as sliders, holders or carrier material are destroyed, it is imperative that
they be replaced.
2.
Caution
Cutting injury due to sharp-edged sheet metal parts.
Always wear suitable protective gloves.
Maintenance Summary - Care activities
40
Maintenance Instructions
G200.3 G220.3
DIE248EN - 15.08.2022
To Next Page
Loading...
