5.
Example: Chip conveyor G420
Clean strainer basket and magnetic filter plates (option).
6. Remove and clean pre-filters (option) on the cooling lubricant pump.
7.
If the supply of cooling lubricant is insufficient, the strainer
basket on the cooling lubricant pump must be cleaned.
Remove cooling lubricant pump. Remove and clean strainer basket on the
cooling lubricant pump.
Alternatively, the following procedure can be used!
Extract cooling lubricant, remove screen directly from the cooling lubricant
pump and clean it.
Maintenance Summary - Care activities
44
Maintenance Instructions
G200.3 G220.3
DIE248EN - 15.08.2022
To Next Page
Loading...
