Example: HSK clamping sets from Berg
New or manufacturer-reconditioned clamping sets must not be
relubricated. Improper lubrication of the clamping sets may cause
damage to the clamping set or failure of the entire clamping system.
Requirement
A measuring device required to measure the clamping force can be sourced through
INDEX , a representative or the tool manufacturer.
Example: Clamping force measuring system from Berg
Maintenance Summary - 2.000 Operating hours
64
Maintenance Instructions
G200.3 G220.3
DIE248EN - 15.08.2022
To Next Page
Loading...
