Index MS40-8 - AM035 - Replace the Breathing Filter at the Filler Neck of the Hydraulic Fluid Tank

AM035 - Replace the breathing filter at the filler neck of the hydraulic fluid tank.
Orientation
The breathing filter on the oil filler neck of the oil tank must be
replaced depending on the environmental conditions.
Due to different requirements and/or specifications of the respective
manufacturers, be sure to review the respective manufacturer's
documentation!
Filters are hazardous waste and must be disposed of in a controlled
manner.
Use only the original filters according to the spare or wear parts list.
Only filters with retained particle sizes described in the fluid plans
must be used.
Maintenance Summary - Care activities
19
Maintenance Instructions
MS40-8
DIM078EN - 02.06.2020