Table of contents
Preface........................................................................................................................................................................1
General notes..........................................................................................................................................................1
Safety Instructions...................................................................................................................................................1
Service Interval - Care activities.............................................................................................................................. 7
Maintenance Summary - Care activities..................................................................................................................8
AM010 - Checking the work area door and window pane....................................................................................... 9
AM016 - Check the pressures on the machine......................................................................................................11
AM018 - Check hydraulic and lubrication systems................................................................................................12
AM030 - Visual inspection of all fluid lines and electrical cables........................................................................... 15
AM032 - Check pre-pressure of pressure accumulators....................................................................................... 17
AM035 - Replace the breathing filter at the filler neck of the hydraulic fluid tank................................................... 19
AM040 - Check pneumatic system (visual inspection).......................................................................................... 21
AM055 - Cleaning of the machine......................................................................................................................... 23
AM065 - Check Stäubli robot................................................................................................................................ 25
AM080 - Clean and lubricate chucks.....................................................................................................................26
AM090 - Check work area light (visual inspection)................................................................................................27
AM105 - Clean cooling lubricant outlet on spindle carrier......................................................................................28
AM110 - Check the window pane at the level sensor of the vacuum rotation filter.................................................30
AM125 - Check coolant.........................................................................................................................................32
AM130 - Removing clamping element holder........................................................................................................34
AM240 - Lock spindle............................................................................................................................................37
AM310 - Clean collets and base body...................................................................................................................39
AM335 - Remove, inspect, lean and reinstall the spindle liner tubes.....................................................................44
AM340 - Visual inspection of the fire extinguishing system................................................................................... 46
AM370 - Checking gas springs on the control cabinet door.................................................................................. 47
Table of contents
I
Maintenance Instructions
MS40-8
DIM078EN - 02.06.2020
To Next Page
Loading...
