AM310 - Clean collets and base body
Carrying out the maintenance activities described below requires
special knowledge. For this reason, these maintenance activities
must only be carried out by staff that has received adequate training
by the machine manufacturer!
Orientation
The Hainbuch “ToPlus” clamping system is provided for this lathe. This clamping
system is suitable for square, hexagonal and bar stock. The collets and collet
mountings must be cleaned regularly depending on the machine utilization, the type
of machining, and the materials used. Hainbuch offers various tools for removal and
installation.
Example: Spanntop system (Hainbuch)
Example: Changing device (Hainbuch)
Maintenance Summary - Care activities
39
Maintenance Instructions
MS40-8
DIM078EN - 02.06.2020
To Next Page
Loading...
