EasyManua.ls Logo

Index V4 - OFF Menu

Default Icon
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19 Index V4 Embosser manual
© 2015 Index Braille
www.indexbraille.com
Calibration
Calibration
Calibration of paper
feed step length
Adjust embossing-head reference
position
See keyboard adjustment of "distance
from wall
Only Braille Box
(1)
By changing "paper size", "duplexing", "distance between Braille lines" and "braille cell size"
settings all margins will automatically be set to 0 with maximum characters per line and lines per
page.
(2)
Supported duplexing formats:
Basic-D single/double-sided; single/double-sided z-folding, sideways z-folding (vertical)
single/double-sided.
Everest-D single/double-sided, single/double-sided landscape (paper format landscape),
single/double-sided saddle stitch 4-pages (newspaper format).
Braille Box double-sided saddle-stitch 4-pages with A3 or 11x17 inch paper size
(recommended). Other supported, but not recommended printout formats are A4, 11x8,5
letter, 11x11,5 portrait and A3, 11x17 landscape.
(3)
When the "Braille tray full" is reached, the printer will stop and echo "Braille tray full".
Remove the paper and press ON to continue the embossing.
(4)
The margin may be selected when space is available. To make space available reduce
characters/line or lines/page.
(5)
Everest-D and Braille Box In "Number of pages in each Braille volume" the embosser
may automatically split up a braille document to separate volumes. The volume is in multiple of 4
(4,8...etc), 0 for no volume handling. If page numbering with volume number is selected it is
printed as follows; "Braille page" #1, "volume #1", etc at the selected position on the paper.
5.4 OFF Menu
OFF Menu is available only when the embossing process is stopped by pressing the OFF key
during the embossing of a document.
1. Press OFF to stop embossing
2. Press MENU to be able to use the OFF Menu
3. Press arrow UP/DOWN
4. Select the operation and press OK
5. Press ON to leave the OFF Menu and continue the original embossing sequences
MAIN MENU
SUB MENU
INFO
Current
document
Echo embosser status information
Echo number of remaining copies
Complete embossing of current
document and cancel remaining
copies
Stop embossing of current
document