23 Index V4 Embosser manual
© 2015 Index Braille
www.indexbraille.com
MENU/System//Calibration///OK
3. The first page will feed through the sheet feeder in order to define value.
4. The second page will be embossed with the above defined paper movement value. The
printout will be page will be automatically generated wit maximum lines per page and
characters per line on the paper size the embosser is setup for.
7 LED feedback
Control panel LED feedback
Green LED = 48 Voltage input is OK
Yellow LED = the embosser is on line.
Red LED = the menu process is active.
Basic-D and Everest-D LED interfaces between the USB port and service serial port
Paper sensor located
on the black arrow
Paper movement indicator located behind the left
tractor
Paper sensor located
above the embossing
head
8 After sales support
Additional information about embossers produced by Index Braille, user and service manuals,
downloads, knowledge base, videos, printer drivers, braille editor software knowledge articles
are available at:
www.indexbraille.com
the USB memory stick that is included in the shipment
For support and service request first contact your local distributor and if you need further
information contact support@indexbraille.com
8.1 Warranty information
Index Braille provides two (2) year of warranty on parts for all Index embossers, following the
Orgalime S2000 agreement.
8.2 Embosser firmware upgrades
Free download
All Index Braille firmware may be downloaded and upgraded from www.indexbraille.com free of
charge.
To Next Page
Loading...