2 tina03e1 (0206) BPG400 v1.om
In all communications with INFICON, please specify the information on the product
nameplate. For convenient reference copy that information into the space provided
below.
Model:
PN:
SN:
V W
INFICON AG, LI-9496 Balzers
This document applies to products with the following part numbers:
BPG400 (without display)
353-500
(vacuum connection DN 25 ISO-KF)
353-502 (vacuum connection DN 40 CF-R)
BPG400 (with display)
353-501
(vacuum connection DN 25 ISO-KF)
353-503 (vacuum connection DN 40 CF-R)
BPG400-SD (with DeviceNet interface and switching functions)
353-507
(vacuum connection DN 25 ISO-KF)
353-508 (vacuum connection DN 40 CF-R)
BPG400-SP (with Profibus interface and switching functions)
353-505
(vacuum connection DN 25 ISO-KF)
353-506 (vacuum connection DN 40 CF-R)
The part number (PN) can be taken from the product nameplate.
If not indicated otherwise in the legends, the illustrations in this docu-
ment correspond to the KF vacuum connection. They apply to other
vacuum connections by analogy.
In illustrations that apply to all types of the BPG400 gauge family, the
gauge with part number 353-500 is shown.
All BPG400 versions are shipped with an instruction sheet (® & [8]). BPG400-SD
and BPG400-SP come with a supplementary instruction sheet describing the field-
bus interfaces and the switching functions (® & [9]).
We reserve the right to make technical changes without prior notice.
The BPG400 gauges have been designed for vacuum measurement of non-flam-
mable gases and gas mixtures in a pressure range of 5×10
-10
… 1000 mbar.
The gauges can be operated in connection with the INFICON Vacuum Gauge
Controller VGC103 or VGC40x or with other control devices.
Product Identification
Validity
Intended Use
To Next Page
Loading...
Need help?
General