5 | Installation INFICON
10 / 36 CU1000-operating-instructions-jina54en1-06-(1901)
5 Installation
5.1 Connecting the control unit
Establish connection of "LD" of the control unit and "Control Unit" of the MSB box with
the data cable.
The data cable on the control unit can also be connected or removed during operation.
► If needed, connect headphones or speakers to the headphones symbol.
DANGER
Hearing damage from loud volume setting
Loud volume setting can damage hearing.
► Do no set volume of headphones too loud.
To Next Page
Loading...
