Inficon PCG554 - Deinstallation Procedures; Safety and Removal Steps

56
tira85e1-a (2014-10) PxG55x.cp
A device reset is initiated when the following byte sequence is sent.
Command
Byte 0
Byte 1
Byte 2
Byte 3
Byte 4
Byte 5
0x74
0x65
0x73
0x65
0x72
0x00 = Standard reset, 0x66 = Factory Reset
Status (supported values)
0
1
2
3
255
Reserved
Reserved
Last command completed, error, no response
Reserved
Command is executing
Response
Byte 0 See Subindex 0x02
Byte 1 Unused
Byte 2…n Unused
Execution of this command clears the latched exceptions.
Index SI DataType NV Access PM Name
FBF1 0x01 V_STRING(5) RW Command
0x02 BYTE RO Status
0x03 V_STRING(1) RO Response
A device reset is initiated when the following byte sequence is sent.
Command
Byte 0
Byte 1
Byte 2
Byte 3
Byte 4
0x74
0x65
0x73
0x65
0x72
Status (supported values)
0
1
2
3
255
Last command completed, no error, no response
Reserved
Last command completed, error, no response
Reserved
Command is executing
Response
Byte 0 See Subindex 0x02
Byte 1 Unused
Byte 2…n Unused
Subindex 0x01
Subindex 0x02
Subindex 0x03
4.19.4 Exception Reset
Command
Subindex 0x01
Subindex 0x02
Subindex 0x03