Copy in Embedded Workbench 8.4 folder
SDL folder IAR Systems folder
Figure 8 Copying to Embedded Workbench
3.4.4 Example usage of SDL
1. Go to the following folder of SDL:
C:/<user path>\ PSoC_Sample_Driver_Library_x.x.x\PSoC4hvpa144k\tools\iar\flash
2. Open IAR EWARM v8.42.1, navigate to the flash workspace and open accordingly.
Figure 9 Flash file
3.
The sample project of IAR EWARM opens as follows:
Getting started with PSoC
™
HV PA family
3 Development environment and tools
Application note 20 002-30264 Rev. *B
2023-04-19
To Next Page
Loading...
