Infineon AN230264 - Sample Driver Library (SDL)

SWDIO
SWCLK
XRES
SWCLK
SWDIO
XRES
GND
GND
GND
VDDD
VDDD
1
3
5
7
9
11
13
15
17
19
2
4
6
8
10
12
14
16
18
20
4.7k۬
VDDD
4.7k۬
20۬
100nF
VDDD
PSoCһх HV PA
Figure 5 Basic connection diagram of MIPI 20-pin connector
3.2 Sample Driver Library (SDL)
Infineon provides an SDL including startup as sample soware. The SDL provides a simple interface to access
various peripherals and is used for system validation, hardware bring-up, benchmarks, feasibility studies, and
demos. The SDL cannot be used for production purposes because it is not qualified with any automotive
standards. The SDL integrates device header files, startup code, and peripheral drivers. The SDL contains a set
of firmware drivers that provide APIs for accessing device-specific resources (See References).
Getting started with PSoC
™
HV PA family
3 Development environment and tools
Application note 9 002-30264 Rev. *B
2023-04-19