Figure 22 Copy main_cmoplus.c file
3. Go to: C:/<user path>\ PSoC_Sample_Driver_Library_x.x.x\PSoC4hv144k\src and replace the copied
main_cm0plus.c file at the src level. You should make a backup of the main_cm0plus.c file.
Figure 23 Replacing copied file
4. Go to the following folder of SDL:
C:/<user path>\ PSoC_Sample_Driver_Library_x.x.x\PSoC4hv144k\tools\iar\flash
5. Open PSoC4hv144k_flash_cm0plus_template.eww to open the IAR EWARM sample project.
6. Rebuild and download the project to the board. See the Readme.txt file in each folder of the sample code
for a detailed explanation of the use case.
Getting started with PSoC
™
HV PA family
3 Development environment and tools
Application note 32 002-30264 Rev. *B
2023-04-19
To Next Page
Loading...
