19
Select MANUAL from Home display, then
press up or down button to navigate to
ROLLER. Press right button, then use the
up and down buttons to select your desired
foot roller speed: 1 = slow, 2, 3 = fast, or Off
(deactivate foot rollers). Press OK button to
select the foot roller setting.
Alternatively, press the Foot Roller button
on your remote control. If the foot rollers
are on, pressing this button will turn the
foot rollers off. Press again to turn on. Your
current foot roller speed is displayed in the
in-use screen in the bottom right corner.
Foot Reflexology Rollers &
Total Calf
TM
Kneading and Oscillation
Smart tip: While the in-use screen is
displayed during a massage program, press
the left or right directional button to adjust
the airbag intensity (this feature works in
both Auto and Manual programs).
As well as having a corded remote control, your chair also comes with a built in joystick
controller which is located on the top of the left arm panel. The joystick controller allows you
to turn the chair on and off, select from six of the auto program’s, adjust the recline angle of
the seat back, and wirelessly charge your mobile device.
Wireless Charging Pad:
Place any wireless charging-enabled phone directly on to pad to charge.
Button: Press and hold to turn chair ON. Press again to cycle through six of the auto
program’s. The program name is announced through the speakers and starts immediately.
Press and hold to turn chair OFF.
Dial:
Use dial to recline and upright the Evolution Max 4D massage chair by turning left or right.
USB Charging port: Attach a standard USB-A cord to charge devices.
Joystick Control and Wireless Charging/USB Port
Button
Dial
USB Charging Port
Wireless Charging
To Next Page
Loading...
