Multiple Infinitys (Wireless DMX Control)
01) Install multiple Infinitys at the desired positions (maximum Wi-Fi distance: 250 m).
02) In order for the Infinitys to receive a wireless DMX signal properly, activate W-DMX on all Infinitys (see
pages 26 for more information).
03) Pair the wireless signal transmitter with multiple Infinitys. In order to create a wireless connection,
please read the manual of your wireless signal transmitter.
04) When the green W-DMX indicator on the display is blinking, the device is searching for a
connection.
05) Once a connection has been established, the W-DMX indicator will stop blinking and will light up
green.
06) Use a DMX cable to connect the transmitter to a suitable light controller.
Multiple Infinitys Wireless DMX Control
To Next Page
Loading...