Glass Gobo Orientation
Coated glass gobos are inserted with the coating against the rim of the holder (away from the spring).
Textured gobos are inserted with the smooth side against the spring. This provides the best results when
combining rotating gobos.
When an object is held up to the coated
side, there is no space between the object
and its reflection. The back edge of the
gobo cannot be seen when looking
through the coated side.
When an object is held up to the uncoated
side, there is a space between the object and
its reflection. The back edge of the gobo can
be seen when looking through the uncoated
side.
To Next Page
Loading...