InfiRay Geni Series - Quick Menu Function; Quick Menu Options

InfiRay Outdoor • Geni Series• Operating Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
Icon
Color/Status
Battery Status
Green
more than 40%
Yellow
20% - 40%
Red
Less than 20%, need to charge instantly
Lightning icon
inside
External power supply meanwhile charging
the Battery Pack
USB icon
External power supply without Battery Pack
in the riflescope
15 Quick Menu Function
The basic settings (including image mode, display brightness, image
sharpness and zeroing distance) can be changed in the Quick Menu.
➢ In the home screen, short press the M (5) button to enter the Quick
Menu.
➢ Switch the function items as described below with a short press of Up
(6) / Down (4) button. The selected items will be highlighted in
background:
⚫ Image Mode: short press the M (5) button to switch image modes
among White Hot, Black Hot, Red Hot, Pseudo Color and Target
Highlighting mode.
⚫ Display Brightness: short press the M (5) button to change
brightness level from 1 to 5.
⚫ Image Sharpness: short press the M (5) button to switch the
image sharpness from 1 to 5.
⚫ Zeroing Distance: short press the M (5) button to change default
zeroing distance under the current zeroing profile (if you select the
profile A, you can only switch the distance saved in the profile A).
➢ Press and hold down the M (5) button to save modifications and exit
the menu or wait 5 seconds to exit automatically.