InfiRay Outdoor • Geni Series• Operating Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
17 PIP Function
The PIP (Picture in Picture) function allows you to see both a magnified
image in a particular window and the main image.
➢ Press the Zoom (6) + Menu (5) button in the home screen to switch the
PIP function on /off.
➢ When the main image is enlarged
with a short press of the Zoom (6)
button, the PIP image will be
enlarged 2× synchronously.
➢ For example, when the
magnification of the main image is 4×, 8×, 12×, 16×, the corresponding
magnification of the PIP image is 8×,16×,24×,32×.
18 Stadiametric Rangefinder
Geni series is equipped with a stadiametric rangefinder, which allows you
to estimate the approximate distance to an object, if its size is known.
➢ In the home screen, press and hold the Up (6) + M (5) buttons at the
same time to enter the stadiametric ranging interface, and two
horizontal lines will appear on the upper and lower positions of the
cursor.
➢ Locate the object in the middle of the lines, then move the lines to locate
the target between lines by the Up
(6) / Down (4) button.
➢ The approximate distance of the
target is displayed on the left of
the screen.
➢ Short press the Up (6) + M (5) +
Down (4) buttons at the same time to switch the unit between cm/m and
inch/yard.
19 Range Notification
➢ In the home screen, long press Up (6) button to enter the range
notification interface.
➢ In the range notification interface, the prey type, height and effective
range is displayed on the bottom. The measurement lines become two
To Next Page
Loading...
