InfiRay Outdoor • Geni Series• Operating Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
⚫ Select one of three Profiles (marked with the letters A, B, C) with a
short press of the Up (6) / Down (4) button.
⚫ Briefly press of the M (5) button to confirm your selection.
⚫ The name of the selected profile appears in the status bar at the top
of the display.
Select reticle type
⚫ Select Reticle Type option with the Up (6) / Down (4) button in the reticle submenu.
⚫ Briefly press of the M (5) button to enter the Reticle Type submenu.
⚫ Select the desired reticle type in the list of seven reticle types with
short pressing the Up (6) / Down (4) button.
⚫ The reticle types change as the cursor goes down the reticle type
list.
⚫ Confirm your selection with a short press of the M (5) button.
Select reticle color
⚫ Select Reticle Color option with the Up (6) / Down (4) button in the reticle submenu.
⚫ Briefly press of the M (5) button to enter the Reticle Color submenu.
To Next Page
Loading...
