InfiRay Geni Series - Main Menu Functions: Wi-Fi, Mic, Calibration; Wi-Fi and Microphone Control; Calibration Mode Selection

InfiRay Outdoor • Geni Series• Operating Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
Wi-Fi
Turn Wi-Fi on/off
⚫ Press and hold down the M (5) button to enter the Main Menu.
⚫ Select the Wi-Fi menu option with the Up (6) / Down (4) button.
⚫ Briefly press of the M (5) button to turn Wi-Fi on /off
Microphone
Turn Microphone on/off
⚫ Press and hold down the M (5) button to enter the Main Menu.
⚫ Select the Microphone menu option with the Up (6) / Down (4) button.
⚫ Briefly press of the M (5) button to turn microphone on/off.
Calibration
Select calibration mode
There are three calibration modes: Automatic(A), Manual (M) and Background (B).
The selected calibration mode is displayed in the status bar (see Status Bar section).
⚫ Press and hold down the M (5) button to enter the Main Menu.
⚫ Select the Calibration menu option with the Up (6) / Down (4) button.
⚫ Briefly press of the M (5) button to enter the submenu.
⚫ Press Up (6) / Down (4) button to select one mode from the following modes:
- Automatic. The software determines the need for calibration in automatic mode. The
calibration process starts automatically.
- Manual. The user independently determines the need for calibration based on the quality of the observed image.
- Background. Close the lens cover before starting the calibration.
⚫ Briefly press M button to confirm your selection.