26
Advanced Menu
Image:
3D Control:
3D Control: allows you
to enjoy 3D (stereoscopic) content. Your projector
supports two synchronization modes (External Sync and DLP Link™) for con-
trolling LCD shutter glasses. In addition to the
projector, you will need a pair
of 3D shutter glasses, 3D content, and 3D compatible source (and emitter).
Ensure the glasses you choose are consistent with the synchronization mode
you will be using.
3D Sync Invert: (Only applies when 3D control
is set to DLP Link™.) If the
image appears to flutter, look odd or if the image depth looks off or you expe-
rience eye strain, turn this feature on to see if the image improves.
Color...
Color:
adjusts a video image from black and white to fully saturated color. The
color setting applies to video sources only.
Red/Green/Blue Gain:
adjusts the gain of the red, green or blue channel of the
image.
Red/Green/Blue Offset: adjusts the of
fset of the red, green or blue channel of
the image.
Color Space:
applies to computer and component video sources. It allows you
to select a color space that has been specifically tuned for the input signal.
When Auto is selected, the projector automatically determines the standard. To
choose a different setting, turn off Auto, then choose RGB for computer
sources or choose either REC709 or REC601 for component video sources.
Color Temperature:
changes the intensity of the colors. Select a listed relative
warmth value.
Gamma: se
lect the appropriate gamma from among Video, Film, Bright, and
CRT.
Tint:
adjusts the red-green color balance in the image of NTSC video images.
The tint setting applies to NTSC video sources only.
White Intensity: increases
the brightness of whites that are near 100%.
PC:
Force Wide:
when this is off, the analog locking algorithms choose the stan-
dard mode resolution (4:3) as the preferred default resolution. When this is on,
the analog locking algorithms choose wide mode resolution (16:10) as the pre-
ferred default resolution.
Phase:
adjusts the horizontal phase of a computer source.
Prevent PC Screen Saver: p
revents your computer from going into Screen
Save mode. The projector must be connected to the PC via a USB cable for
this feature to work.
Sync Threshold: (progressive signals
only) If a hardware device, such as a
DVD player, is not syncing properly with the projector, select this option to
help it to sync when connected to the projector.
Tracking: adjusts the
vertical scan of a computer source.
Horizontal/Vertical Position:
adjusts the position of a computer source.
Video:
Detect Film: determines whether the original source of the input video was
film (progressive) or video (interlaced).
Overscan:
removes noise around the video image.
Set Black Level: analyzes
the current input image and calculates an offset
value which is then added to the analog to digital converter black level value.
This ensures optimum black level for each analog source.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
