EasyManuals Logo

InFocus IN1503 User Manual

InFocus IN1503
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
22
Using the audio
Using the projector’s speakers
When using the HDMI connector, both audio and video are sent over the cable to
the projector and audio will play from the projector's speakers.
For inputs other than HDMI, connect the audio source to the Audio In connector
to
hear au
dio through the projector's speakers.
To adjust the volume, press the Volume buttons on the keypad or remote.
Troubleshooting Audio
If you aren’t hearing the audio, check the following:
Make sure the audio cable is connected
to
the Audio In connector on the
projector, and that the other end of the cable is connected to an “audio out”
connector on the source (not a “line-in” or “microphone” connector).
Make sure the volume is turned up enough. Press the Vo
l
ume button on the
keypad or remote.
Make sure the correct source is active.
Adjust the audio source.
If playing a video, make sure the playback has not been paused
.
connect audio cable
adjust volume

Other manuals for InFocus IN1503

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the InFocus IN1503 and is the answer not in the manual?

InFocus IN1503 Specifications

General IconGeneral
Matrix size0.65 \
Native aspect ratio16:10
Projection distance0.76/3.51 m
Projection technologyDLP
Supported aspect ratios4:3, 5:4, 16:9, 16:10
Contrast ratio (typical)1800:1
Screen size compatibility- \
Projector native resolutionWXGA (1280x800)
Keystone correction, vertical-30/30 °
RS-232 ports0
FocusManual
Offset105 %
Throw ratio0.72 - 0.86:1
Focal length range- mm
Lamp power165 W
Light source typeLamp
Service life of light source3000 h
Service life of light source (economic mode)4000 h
RMS rated power1 W
Number of built-in speakers1
Audio (L/R) in-
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level29 dB
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)170 W
Full HDNo
Supported video modes1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format systemNTSC, PAL, SECAM
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Depth222 mm
Width235 mm
Height83.8 mm
Weight2000 g
Package weight4300 g

Related product manuals