24
Using the keypad buttons
Most buttons are described in detail in other sections, but here is an over-
view of their functions:
Power–turns the projector on and off (page 10).
Auto Image–resets the projector to the source.
Presets–cycles through the available preset settings (page 29).
Keystone–adjusts squareness of the image (page 11).
Menu–opens the on-screen menus (page 27).
Select–confirms choices made in the menus (page 27).
Up/Down arrows–navigates to and adjusts settings in the menus (page 27).
Volume –adjusts sound (page 23).
Source–changes the active source.
menu navigation
buttons
To Next Page
Loading...
