Setting up the LitePro 580
10 LitePro 580 User’s Guide
Connecting an IBM-compatible desktop computer
1. Plug the LCD connector on the VGA cable into the projector’s
Computer port.
2. Unplug the monitor cable from the computer’s graphic port.
3. Plug the monitor cable that you just removed into the MONITOR
connector on the VGA cable.
4. Plug the VGA connector on the VGA cable into the computer’s
graphics port.
5. Tighten the thumb screws on all the connectors to ensure proper
grounding.
6. Turn on the projector, monitor, and computer.
VGA Cable
To Next Page
Loading...
