Maintenance
52 LitePro 580 User’s Guide
Replacing batteries in the remote control
The life of the remote batteries depends on how often and how long
you use the remote. Symptoms of low battery charge include erratic
responses when using the remote and a reduced range where the
remote works.
Follow these steps to replace the batteries.
1.
Slide the battery cover off the end of the remote.
2.
Remove the old batteries.
3.
Install two new AAA alkaline batteries. Make sure each is
installed in the correction orientation.
4.
Slide the battery cover back on the remote.
To Next Page
Loading...
Need help?
General