Maintenance
LitePro 580 User’s Guide 51
Do not drop the lamp module or touch the glass
bulb! The glass can shatter and cause injury.
4.
Fit the new lamp in place.
• Align the lamp in the correct direction.
• Lightly press on it until it touches bottom.
• Tighten the two screws.
5.
Replace the lamp cover.
• Reposition the cover in place.
• Replace the screws and tighten them.
Never operate the LitePro with the lamp cover open
or removed. This disrupts the airflow and causes the
LitePro to overheat.
To Next Page
Loading...
Need help?
General