InFocus LitePro 580 User Manual

Appendix
LitePro 580 User’s Guide 67
Laptop display activation chart
The LitePro connects to a laptop computer through the computer’s
external monitor port. Most laptop computers do not automatically
activate this port when a device such as the LitePro is connected. The
following chart lists the commands that activate the external monitor
port for a variety of computers. If your computer is not listed here,
refer to your computer’s documentation.
Computer
Key command to
activate port
Key command to
de-activate port
Acer Ctrl-Alt-Esc (for setup)< Ctrl-Alt-Esc (for setup)
AST FN-D or Ctrl-D FN-D or Ctrl-D
Ctrl-FN-D Ctrl-FN-D
FN-F5 FN-F5
type from A:/IVGA/CRT type from A:/IVGA/CRT
Austin Ctrl-Alt-,, Ctrl-Alt-,
Altima* Shift-Ctrl-Alt-C Shift-Ctrl-Alt-L
setup VGA/Conf.Simulscan setup VGA/Conf.Simulscan
Amrel* ** setup menu setup menu
Shift-Ctrl-D Shift-Ctrl-D
BCC automatic - no activation
command needed
reboot computer
Bondwell LCD or CRT option LCD or CRT option
Chaplet** setup screen setup screen
Commax Ctrl-Alt-#6 Ctrl-Alt-#5
Compaq** Ctrl-Alt-< Ctrl-Alt->
FN-F4 FN-F4
Data General Ctrl-Alt-Command Ctrl-Alt-Command
Data General
Walkabout
2 CRT/X at DOS prompt reboot
Datavue Ctrl-Shift-M Ctrl-Shift-M
Dell* Ctrl-Alt-< Ctrl-Alt->
Ctrl-Alt-F10 Ctrl-Alt-F10
Digital automatic reboot
FN-F2 FN-F2
Dolch dip switch to CRT dip switch to LCD
Epson dip switch to CRT dip switch to LCD

InFocus LitePro 580 Specifications

General

Brand	InFocus
Model	LitePro 580
Category	Projector
Language	English