Setting up the LitePro 580
LitePro 580 User’s Guide 13
Connecting a Macintosh PowerBook
1. Attach one Mac adapter to the VGA connector of the VGA cable.
2. Plug the LCD connector on the VGA cable into the projector’s
Computer port.
3. Plug the VGA connector (with the Mac adapter) on the VGA
cable into the PowerBook’s video port.
4. Tighten the thumb screws on all connectors.
5. Turn on the projector.
6. Turn on the PowerBook.
7. Enable video mirroring by opening the PowerBook Display Con-
trol panel and selecting “Mirroring.”
PowerBooks require the video-out cable, provided
with each PowerBook, for external video. Use it to
connect the PowerBook to the Mac adapter on the
VGA cable.
Mac Adapter
VGA Cable
To Next Page
Loading...
