6
Setting up the Projector
F
IGURE 3
Projected image size for LitePro 620
Connecting the CableWizard to the Projector
The CableWizard™ simplifies the connection process by provid-
ing a central hub for all the connections between the projector
and your computer. The connectors on the CableWizard are
labeled with icons.
Connect the end of the CableWizard cord to the con-
nector on the projector’s connector panel (Figure 4).
CAUTION: Turn off your
computer, monitor and the
projector whenever you connect
or disconnect cables.
F
IGURE 4
Connecting the CableWizard cable to the projector
5 ft.
10 ft.
25 ft.
PROJECTOR
Downloaded from ProjectorsManual.com Manuals
To Next Page
Loading...
