14
Setting up the Projector
Do you want to control the computer’s mouse from the projector’s
remote or keypad?
1 Unplug the mouse from your Macintosh or locate an unused
ADB connector.
2 Plug the end of the CableWizard mouse cable into the
mouse or the (ADB) connector on your Macintosh.
3 Plug the end of the CableWizard mouse cable into the
connector on the CableWizard.
FIGURE 13
Connecting the CableWizard monitor, audio and mouse cables to a Macintosh desktop
computer
Now you’re ready to power up the projector and the Macintosh.
Skip to “Powering up the Projector and Adjusting the Image” on
page 21.
audio cable
monitor cable
mouse cable
computer cable
Downloaded from ProjectorsManual.com Manuals
To Next Page
Loading...
Need help?
General
