InFocus LITESHOW4 - Appendices; Appendix A: PtG Converter Utility

48
Appendix A: Using PtG Converter
1) Download the PtG Converter application from the LiteShow USB token or from the InFocus
website at: www.infocus.com/support.
2) Once installed, the converter will reside in the MobiShow\MobiShow PtG Converter folder within
Programs.
3) Launch the PtG Converter and the following control panel will display:
4)
5) Click
Convert
to select and start conversion of the desired PowerPoint presentation.
PtG Converter will convert the PowerPoint file to a PtG format.
Note:
Before clicking
Convert
,
turn off all extended monitors. Only the primary monitor should be active to ensure proper PtG
conversion.
6) After successfully converting the file, you can use any of the following controls:
a.
Preview
expands and collapses the preview pane.
b.
Play
plays the selected PtG file.
c.
Open
allows another PtG file to be opened.
Play
Open Preview
Convert