To Next Page
T
Todd ChenAug 14, 2025
How to fix the temperature light on my InFocus NLMP19005?
- AabutlerAug 14, 2025
If the temperature light is on, make sure the vents aren’t blocked. Turn the InFocus Projector off and allow it to cool for one minute.
How to fix the temperature light on my InFocus NLMP19005?
If the temperature light is on, make sure the vents aren’t blocked. Turn the InFocus Projector off and allow it to cool for one minute.
What to do if my InFocus NLMP19005 Projector says 'Signal out of range'?
If you see 'Signal out of range' on your InFocus Projector, press the Auto Image button on the keypad or remote. To adjust computer refresh rate, go to Control Panel > Display > Settings > Advanced > Adapter (location varies by operating system). You may also need to set a different resolution on your computer.
Why is the image on my InFocus NLMP19005 Projector fuzzy or cropped?
If your image is fuzzy or cropped, set your computer’s display resolution to the native resolution of the projector (Start > Settings > Control Panel > Display > Settings tab). For a laptop, disable the laptop monitor or turn on dual-display mode.
How to square the image on my InFocus NLMP19005?
To fix the image, adjust the Keystone in the Basic Picture menu of your InFocus Projector.
How to make the image sharper on my InFocus Projector?
To resolve the issue, adjust the Sharpness in the Basic Picture menu of your InFocus Projector.
How to adjust the aspect ratio on my InFocus Projector?
Change the aspect ratio to 4:3 or 16:9 in the Basic Picture>Aspect Ratio menu of your InFocus Projector.
How to adjust color settings on my InFocus NLMP19005?
Adjust the color, tint, brightness, and contrast in the Basic Picture menu and/or color space in the Advanced Picture menu of your InFocus Projector.
What to do if PowerPoint video doesn't play on my InFocus Projector?
If your computer is using the projector's DisplayLink connector, see the DisplayLink Software User's Guide for video troubleshooting information. Also, turn off the internal LCD display on your laptop.
Why does my InFocus NLMP19005 Projector only show my laptop background?
Use DisplayLink software to change the display mode from Extended Desktop to Duplicated Desktop. In Windows, disable 'Extend my Windows Desktop' in Control Panel > Display > Settings > Display 2 (location varies by operating system). Uncheck this option, then click Apply.
General| Model | NLMP19005 |
|---|---|
| Contrast Ratio | Not Applicable |
| Lamp Life | Varies with projector model |
| Weight | Not Available |
| Lamp Life (Normal) | 30, 000 hours |
| Lamp Life (Economic) | 30, 000 hours |
| Compatibility | PC, Mac, mobile devices |
| Native Resolution | WXGA (1280x800) |
