InFocus NLMP19005 User Manual

45
4
Loosen the captive screws that attach the lamp housing to the projector.
5 Using the handle, carefully remove the lamp housing. Dispose of the
lamp in an environmentally proper manner in accordance with local
disposal laws.
6 Install the new lamp housing, pressing the lamp into place.
7 Tighten the captive screws.
8 Replace the lamp door and tighten both screws.
9 Plug in the power cord and press the Power button to turn the projector
back on.
10 To reset the lamp hour timer, navigate to the Status and Service menu and
select Reset Lamp Hours. See page 34 for details.
Using the security lock
The projector has a security lock for use with a Cable Lock System. Refer to
the information that came with the lock for instructions on how to use it.
screen trigger
12V DC
250 mA
wireless
ready
audio 5
video 5 video 4
video 3
remote
computer 4
computer 2
computer 3
L
R
VH B G R
YPbPr
R
R
L
L
audio 4 audio 3
audio 2
audio 1
LitePort
computer 1
DisplayLink
audio out
IR
serial
monitor out
LAN
+5V DC; 2A
DisplayLink
TM
certified
Security lock

InFocus NLMP19005 Specifications

General

Brand	InFocus
Model	NLMP19005
Category	Projector
Language	English