30
Advanced Picture menu
BrilliantColor™: Produces an expanded onscreen color spectrum that
delivers enhanced color saturation for bright, true-to-life images. Choose
Normal Look for most video sources and Bright Look for most computer
sources.
White Peaking: (video sources only) Increases the brightness of whites that
are near 100%.
Color Temperature:
Changes the intensity of the colors. Select a listed
relative warmth value.
Force Wide: When
this is off, the analog locking algorithms choose the
standard mode resolution (4:3) as the preferred default resolution. When
this is on, the analog locking algorithms choose wide mode resolution
(16:10) as the preferred default resolution.
Overscan: Removes noise around the video image.
Phase:
Adjusts the horizontal phase of a computer source.
Sync Threshold:
(progressive signals only) If a hardware device, such as a
DVD player, is not syncing properly with the projector, select this option to
help it to sync when connected to the projector.
Tracking:
Adjusts the vertical scan of a computer source.
Color Space: This o
ption applies to computer and component video sources.
It allows you to select a color space that has been specifically tuned for the
input signal. When Auto is selected, the projector automatically determines
the standard. To choose a different setting, turn off Auto, then choose RGB
for computer sources or choose either REC709 or REC601 for component
video sources.
Noise Reduction: Reduces temporal and/or spatial noise in the image.
Flesh Tone Correction: Controls the
amount of flesh tone correction applied
to the image.
Set Black Level...: A
nalyzes the current input image and calculates an offset
value which is then added to the analog to digital converter black level
value. This ensures optimum black level for each analog source.
Detect Film:
Controls film mode detection, and determines whether the
original source of the input video was film or video.
Gamma: S
elect the appropriate gamma from among Video, Film, Bright, and
CRT.
Color Gamut: Sets
the color gamut of the input signal.
Color Gain: Adjusts the gai
n of the red, green, or blue channel of the image.
Color Offset: A
djusts the offset of the red, green, or blue channel of the
image.
Horizontal/Vertical Position:
Adjusts the position of a computer source.
Horizontal/Vertical Pincushion: Correct optical pincushion distorti
on.
.
To Next Page
Loading...
Need help?
General
