43
Maintenance
Cleaning the lens
1 Turn the projector off and unplug the power cord.
2 Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
• Avoid using an excessive amount of cl
eaner, and don’t apply the
cleaner directly to the lens. Abrasive cleaners, solvents or other harsh
chemicals might scratch the lens.
3 Lightly wipe the cleaning cloth over the lens in a circular motion.
WARNINGS:
• Turn the projector off and unplug power
cord before cleaning any part
of the projector.
• Do not open any cover on the projector, exce
pt the lamp cover or
projector top cover.
• Do not attempt to service this product yourself as opening and remov-
ing covers may expose you to dangerous voltage and other hazards.
Refer all servicing to qualified service personnel.
To Next Page
Loading...
Need help?
General
