24
www.infopia21.com
Step 3
• After beeping sound, the test will begin automatically and your results will
appear in 3 seconds. It should begin counting down from 3 to 1 second on
the LCD window. The LCD window will display the result of your blood
glucose level, including temperature and time.
• Record the result value in your Element
TM
Auto-coding logbook. When you
pull out the blood glucose test strip, the meter turns off automatically.
CAUTION
1. If the test result is out of the test range, the Hi/Lo message will be
shown on the LCD window. (refer to p35)
2. Safely discard used blood glucose test strips and lancets.
Testing Procedure
25
Step 4
• If you selected to use the User Activity option
during set up, press and button to select
the activity that correlates with your result (refer
to p10), then press .
• If you did not select to use user activity option
during set up, press to continue to step 4-2.
CAUTION
1. If you did not activate the User Activity option, Step4 procedure is not
conducted.
2. Please refer to page 13, if you want to set the User Activity option.
Testing Your Blood -
Case of Setting User Option
To Next Page
Loading...
