96
System Monitoring
The EonStorDS series is equipped with a variety of self-monitoring features that help
keep system managers aware of system operation statuses.
Monitoring Features
You may monitor the system through the following features:
Firmware: The controller in the system is managed by a pre-installed
firmware, which is accessible in a terminal program via the serial port.
For more details, see the Firmware manual in the CD-ROM.
SANWatch: SANWatch is a browser-based Graphical User Interface
(GUI) that can to monitor and manage the system locally or remotely
over TCP/IP network, via the Ethernet Management port. The
management session is conducted using the Ethernet management
port. For more details, see the SANWatch manual in the CD-ROM.
LEDs: LED indicators notify users of system status, events, and failures.
LEDs are located on both the front and rear panel of the chassis. For
details, see and subsequent sections.
Audible alarm: Audible alarm will be triggered in case of system
failures. For details, see PSU / Cooling Module LEDs.
To Next Page
Loading...
