111
System Maintenance
WARNING
Do not remove a failed component from the system until you have a replacement on
hand. If you remove a failed component without immediate replacement, it will
disrupt the internal airflow.
Qualified engineers who are familiar with the system should be the only ones who
make component replacements.
When inserting a removable module, do not use excessive force. Forcing or
slamming a module can damage the connector pins either on the module itself or on
the backplane.
The following components can be replaced:
Controller module (please refer to Replacing the Controller Module)
Memory module (please refer to Replacing the Memory Module for
Storage Systems)
CBM module (please refer to Replacing the CBM for Storage Systems)
Host board (please refer to Replacing the Controller Host Board)
PSU module (please refer to Replacing the Power Supply Module)
Hard drive (please refer to Replacing the Hard Disk Drive)
To Next Page
Loading...
