INFOSEC E4 Value Series - Fault Code Reference; Warning Indicator Reference

53
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 03 16 AA 59 203 26
LCD display
Fault status
Description
When a fault occurs, the UPS will display fault messages on the LCD
panel.
LCD display
3-8. Fault Code
Fault
Fault code
Icon
Fault
Fault code
Icon
DC Bus start failure
01
None
Low Inverter circuit voltage
13
None
DC Bus over
02
None
Inverter circuit output short
circuited
14
DC Bus under
03
None
Battery SCR short-circuited
21
None
DC Bus unbalance
04
None
Over temperature
41
None
Inverter soft start failure
11
None
Overload
43
High Inverter circuit voltage
12
None
3-9. Warning Indicator:
Warning
Icon (flashing)
Alarm
Battery low
Beeping every second
Overload
Beeping twice every second
Battery unconnected
Beeping every second
Over charge
Beeping every second
EPO enable
Beeping every second
Fan failure/Over temperature
Beeping every second
Charger failure
Beeping every second
I/P fuse broken
Beeping every second
Overload 3 times in 30min
Beeping every second