INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 03 16 AA 59 203 26
46 Hz ~ 54 Hz ou 56 Hz ~ 64 Hz
46 Hz ~ 54 Hz ou 56 Hz ~ 64 Hz
Frequency range (batt
mode)
<= 3% THD (linear load); <= 5% THD (non-linear load)
9 hours recover to 90% capacity (Typical)
From 5 to 30 min. depending on the connected load
Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicator.
Battery mode, Low battery, Overload, Fault
20-90 % RH @ 0- 40°C (non-condensing)
Less than 50dBA @ 1 Meter
MANAGEMENT & COMMUNICATION
Infopower included software (Supports Windows® 98/2000/2003/XP/Vista/2008,
Windows© 7,8, 10, Linux, and MAC)
Optional SNMP I : power management from SNMP manager (VMware© compatible) and web browser
EN 62040-2 : 2006; EN 61000-4-2:2009; EN 61000-4-3:2006+A1:2008+A2:2010;
EN 61000-4-4:2004+A1:2010; EN 61000-4-5:2006; EN 61000-4-6:2009; EN
61000-4-8:2010; EN 61000-2-2:2002
* Derate capacity to 60% of capacity in CVCF mode and to 90% when the output voltage is adjusted to 208VAC.
Product specifications are subject to change without further notice.