InfoTronics IDpunch 7 - Callback Transaction; Lift Next Restriction; Lift Next Restriction for Employee

©2011, Attendance on Demand
®
, Inc. Information in this document is subject to change without notice.
33
erase the number and re-enter it. Use the MENU key to navigate among OK, Cancel and the edit field.
3. In the DEPARTMENT (workgroup level) prompt, enter the workgroup identifier for the workgroup
level to transfer. Workgroups are defined in your system. Press the synchronization button to erase
the number and re-enter it. Use the MENU key to navigate among OK, Cancel and the edit field.
Callback Transaction
Supervisors can perform a punch with specified callback tag for an employee; employees can also add a
callback punch themselves. See the following process to perform callback transaction.
1. Press the function key to perform callback transaction.
2. In the Enter Badge/ID prompt, type the employee’s badge number. Press the synchronization button to
erase the number and re-enter it. Use the MENU key to navigate among OK, Cancel and the edit field.
Lift Next Restriction
A punch restriction is a time clock operation that prevents employees from punching In or Out on the time
clock at unauthorized times. When an employee attempts to punch during a restricted period, the
transaction is denied. The restriction can be lifted to allow the employee to punch in the following cases:
Employees who are not assigned to this clock.
Double punch.
The restriction class-based restrictions.
The Lift Next Restriction operation removes any restriction for the next badge or template initiated
transaction. See the following process to lift the next punch restriction.
1. Press the function key to perform the Lift Next Restriction operation.
2. The message “The Specified restriction has been lifted” followed by “Completed. Thank You.” is
displayed.
Lift Next Restriction for Employee
A punch restriction is a time clock operation that prevents employees from punching In or Out on the time
clock at unauthorized times. When an employee attempts to punch during a restricted period, the
transaction is denied. The restriction can be lifted to allow the specified employee to punch in the
following cases:
Employees who are not assigned to this clock.
Double punch.
The restriction class-based restrictions.
The Lift Next Restriction for Employee operation removes any restriction for the specified badge (The
badge number must be provided when performing this operation) or the template associated with the
employee badge when the badge or the finger is used next time. See the following process to lift the next
punch restriction for the specified employee.
1. Press the function key to perform the Lift Next Restriction for Employee operation.
2. At the Enter Badge/ID number prompt, you can wave the employee’s badge in front of the reader,
place the enrolled finger on the platen, or type the employee’s badge number. Press the