©2011, Attendance on Demand
®
, Inc. Information in this document is subject to change without notice.
Data Collection Operation
Use a function for tracking the specific information entered from the clock. The collected data can be
reported or exported later.
1. Press the function key to collect data.
2. At the Enter Badge/ID prompt, you can wave the employee’s badge in front of the reader, place the
enrolled finger on the platen, or type the employee’s badge number. Press the synchronization button
to erase the number and re-enter it. Use the MENU key to navigate among OK, Cancel and the edit
field.
3. A set of prompts are customized based on the configuration. Read the prompt text and enter the
information.
4. The message “The Specified restriction has been lifted” followed by “Completed. Thank You.” is
displayed.
Pass Through Operation
Supervisors or employees can use the function key for the pass through operation to simply present a
splash message or trigger the relay.
1. Press the function key for the pass through operation.
2. The splash message maybe displayed or the relay is triggered based on the configuration.
3. The message “Completed. Thank You.” is displayed.
To Next Page
Loading...