©2011, Attendance on Demand
®
, Inc. Information in this document is subject to change without notice.
Select one of the Badge Label Templates to use as the
preferred template for the Badge Label Report. Layouts are
named by the number of labels horizontally and vertically
available on a single sheet.
Standard 3x6 Badge Label Layout
Standard 2x4 Badge Label Layout
Basic area
Sheet label template description.
Indicates the number of labels horizontally and vertically
available on a single sheet. There are two layouts available: 3
by 6 or 2 by 4.
Note: Properties in the Measurement area are reverted to default
values for the selected layout.
The Measurement area defines properties to adjust the position of the print on the Badge Label report.
In most cases, use default values.
The width in inches of an individual label.
The height in inches of an individual label.
The distance (horizontally) from the left margin of the page to
the beginning of an individual label.
The distance (vertically) from the top margin of the page to the
beginning of an individual label.
The distance (horizontally) from the right border of an
individual label to the left edge of the label to its immediate
right.
The distance (vertically) from the bottom border of an
individual label to the top edge of the label directly beneath it.
The Includes area
Include Employee Name on
Badge Label
When enabled, the employee name is included on the badge
label. The employee’s first name and last name are printed on
two separate rows.
To Next Page
Loading...