INGENIA CAH User Manual

Installation, Operation and Maintenance Manual for Ingenia Outdoor Units CAH-OD-16-00
1
Installation, Operation and
Maintenance Manual for Ingenia
Outdoor Units
Forward this manual to the person responsible for the
installation and maintenance of the product described
herein. Without proper installation and maintenance
equipment damage will result.
August 2016
© Copyright Ingenia Technologies Inc.
All rights reserved.
CAH Outdoor Unit
CAH-OD-1600

INGENIA CAH Specifications

General

Brand	INGENIA
Model	CAH
Category	Air Handlers
Language	English

Summary

Receipt and Inspection

Structural Support Installation

Duct Connection

General Safety Cautions

Unit Rigging Guidelines

Installation Tools and Hardware

Modular Unit Installation Procedure

Gasket Installation

Procedure for installing foam gaskets at module joints for an air seal.

First Module Positioning

Steps for positioning and leveling the first module on its support.

Joining Second Module

Guidance on positioning and joining the second module to the first.

Module Alignment

Module Securing

Caulking and Membrane Sealing

Steps for applying caulking and membrane to module seams for sealing.

Pressure Plate Installation

Interior Seam Sealing

Roof Cladding Installation

Condensate Trap Management

Door Hinge Adjustment

Filter Clip Installation

HEPA Filter Clip Details

Electrical Field Connections

Monorail Hoisting

Hood Installation

Unit Start-up

Fan Isolator Adjustment

Procedure for removing shipping bolts and adjusting fan isolators.

Component Verification

Fan and Motor Assembly Checks

Verification steps for fan and motor assembly, including lubrication and guards.

Belt Tension and Alignment

Fan Start-up and Rotation

Filter Checks

Coil Maintenance

Pre-Start-up Unit Checks

Start-up Information

Start-up Checklist

Service and Maintenance

Bearing Lubrication

Sheaves and Belt Maintenance

Winter Shutdown

Warranty Statement