Ingenico iWL220 - Closing a Day

16
Closing a day
Automac transfer of transacons
Transacons completed during a day can be transferred to the bank either automacally or manually.
Automac transfer will be acvated at the me congured for the terminal.
If automac transfer fails
Transfer the transacons manually or wait for the next automac transfer (in this case transacons that failed
to be sent will also be transferred this me).
Should transfer of transacons fail again during the next automac transfer, contact
Hansab +371 67 357 057
The terminal issues a response on the transfer
report, indicang the number and total
amount of completed transacons. To conrm
successful transfer of transacons, the terminal
prints the response on the transfer report:
“SENDING TRANSACTIONS OK”.