Ingenico iWL220 - Chip Card Transactions

8
Chip card transactions
Ingenico iWL220 Payment Terminal
Message on
terminal screen
Acon
Welcome
The terminal is in standby mode. Enter the sum of the terminal transacon in cents
(e. g. if the sum of the transacon is 10.00 EUR, enter 1,000)
Press the green key
aer compleng the entry.
To correct the sum (one character at a me), press the yellow key
.
To cancel the transacon, press the red key
.
10.00 EUR
Insert the card
Insert the bank card in the chip card reader of the PIN pad connected to the
terminal, or ask the client to insert the card.
Please wait!
Enter PIN
Ask the client to enter their bank card’s PIN on the PIN pad The green key
on
the PIN pad must be pressed.
To correct the PIN (one character at a me), press the yellow key
.
To cancel the transacon, press the red key
.
PIN OK If the correct PIN has been entered, the terminal will connect to the bank
Connecon...
Please wait
Waing for reply...
Please wait
Transacon is
completed
The terminal will print out the rst receipt
Take the receipt
and press the key
Tear o the receipt and press the green key
, to print out the second receipt.
To renounce the second receipt, press the red key .
Ask the client to remove their bank card from the chip card reader.
Aenon!
When paying with a chip card, make sure to use the chip.