5
Re-register the Ingenico Payment Device
To re-register the Ingenico payment device, please follow the steps below:
1. While the device is on the idle screen, enter 1957 and press the green button.
2. Enter 911985.
3. Navigate to Re-Register in the AurusPulse Menu
4. Enter the Store ID and press the GREEN confirm button on the keypad
a. The Store ID can be found on the Store Place Portal of the store for
which the device is being registered.
5. Enter the Zip Code of the store for which the device is being registered and
press the GREEN confirm button on the keypad.
6. Enter the Lane/Register Number and press the GREEN confirm button on the
keypad.
a. This value is the number of the PAR POS Register the payment device
will connect to (i.e., 1, 2, 3, etc.).
To Next Page
Loading...
